Reactive Power Correction Features and Benefits:
Extends the life of motors and other inductive equipment Improves voltage Increases electrical capacity Reduces kWh consumption and demand Improves facility power factor Helps reduce or eliminate power factor penalties charged by electrical utilities Models available for wide range of motor sizes in both 50 and 60 Hz Standard models are NEMA 3R compliant and are suitable for indoor/outdoor installation Optional configurations include NEMA 4X, NEMA 12 and Explosion Proof Voltage ranges from 110V - 6.7kV The EasiLiner provides the benefits of reactive power correction, while virtually eliminating the risks associated with traditional correction methods.
Motorized pieces of equipment are historically inefficient users of electricity contributing to unnecessarily high electrical bills and maintenance costs. Much of the reactive current demanded by lightly loaded motorized equipment is converted to heat throughout a facility's electrical distribution system and can eventually result in equipment damage, repair and replacement costs, and lost production time. The solution is simple. The EasiLiner provides the benefits of reactive power correction, while virtually eliminating the risks associated with traditional correction methods. The EasiLiner increases the efficiency of a facility's power system, which translates into increased motor functionality marked by a reduction in current. This reduced current draw equates to a reduction in kilowatt-hour resulting from distribution losses in a facility. In most facilities, distribution losses are a significant contributor to higher energy and maintenance costs. The EasiLiner reduces these losses by canceling most or all of the reactive current demanded by inductive loads such as motors and transformers. By treating these loads with EasiLiner technology, a facility's electrical distribution system becomes more efficient, equipment runs better and lasts longer and operating costs are reduced. Unlike simple power factor correction capacitors, the EasiLiner does not cause dangerous switching voltage transients in an electrical system. With its input reactor module, EASI's reactive current correction system fully discharges all stored power within 0.3 to 10 seconds from the time connected voltage is removed. As with all EASI power technologies, the EasiLiner will not harm an electrical system. The EasiLiner's components are constructed of self-healing film, containing an inert gas mix of nitrogen and helium - no oils. The EasiLiner introduces no flammable or environmentally unsafe elements into a facility. |
